Axeme - Hwaling Technology Co., Ltd.

Hwaling Technology is based in Taipei, Taiwan. As the interaction of Communication, Electronic Consumer and Computing gadgets has became the main stream in consumer lives. Hwaling practices his specialty with long-term experience in this memory field to drive quality products and services to customers.

SPI NAND Flash

Axeme - Hwaling Technology Co., Ltd.’s mission is to be innovative through new designs and to produce the highest quality products at incredible value. SPI NAND Flash are very helpful to your business. With the help of SPI NAND Flash, everything becomes great.
Item No. Product Name Density Voltage Package File Download
H7A41G26B7CG SPI NAND Flash 1Gb 3.3V 16-pin SOIC 300-mil H7A41G26B7CG_SPI_NAND Flash_1Gb (636 KB)
H7A41G24B8CT SPI NAND Flash 1Gb 3.3V 24-ball TFBGA 8x6-mm (5x5 ball array) H7A41G24B8CT_SPI_NAND Flash_1Gb (741 KB)
H7A41G24B6CG SPI NAND Flash 1Gb 3.3V 24-ball TFBGA 8x6-mm (6x4 ball array) H7A41G24B6CG_SPI_NAND Flash_1Gb (631 KB)
H7A41G24B6CT SPI NAND Flash 1Gb 3.3V 24-ball TFBGA 8x6-mm (6x4 ball array) H7A41G24B6CT_SPI_NAND Flash_1Gb (726 KB)
H7A41G25B4CG SPI NAND Flash 1Gb 3.3V 8-pad WSON 8x6mm H7A41G25B4CG_SPI_NAND Flash_1Gb (627 KB)
H7A41G24B8CG SPI NAND Flash 1Gb 3.3V 24-ball TFBGA 8x6-mm (5x5 ball array) H7A41G24B8CG_SPI_NAND Flash_1Gb (634 KB)

H7A41G26B7CG

1G-BIT 3.3V SPI-NAND FLASH MEMORY

The H7A41G26B7CG (1G-bit) Serial SLC NAND Flash Memory provides a storage solution for systems with limited space, pins and power. The H7A41G26B7CG incorporates the popular SPI interface and the traditional large NAND non-volatile memory space. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 25mA active and 10μA for standby.

H7A41G26B7CG was offered in space-saving packages which were impossible to use in the past for the typical NAND flash memory. The H7A41G26B7CG 1G-bit memory array is organized into 65,536 programmable pages of 2,048-bytes each. The entire page can be programmed at one time using the data from the 2,048-Byte internal buffer. Pages can be erased in groups of 64 (128KB block erase).

The H7A41G26B7CG has 1,024 erasable blocks and supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions.The H7A41G26B7CG supports JEDEC standard manufacturer and device ID, one 2,048-Byte Unique ID page, one 2,048-Byte parameter page and ten 2,048-Byte OTP pages. To provide better NAND flash memory manageability, user configurable internal ECC, bad block management are also available in H7A41G26B7CG.

H7A41G24B8CT

1G-BIT 3.3V SPI-NAND FLASH MEMORY

The H7A41G24B8CT (1G-bit) Serial SLC NAND Flash Memory provides a storage solution for systems with limited space, pins and power. The H7A41G24B8CT incorporates the popular SPI interface and the traditional large NAND non-volatile memory space. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 25mA active and 10μA for standby.

H7A41G24B8CT was offered in space-saving packages which were impossible to use in the past for the typical NAND flash memory. The H7A41G24B8CT 1G-bit memory array is organized into 65,536 programmable pages of 2,048-bytes each. The entire page can be programmed at one time using the data from the 2,048-Byte internal buffer. Pages can be erased in groups of 64 (128KB block erase).

The H7A41G24B8CT has 1,024 erasable blocks and supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to
104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions.The H7A41G24B8CT provides a new Continuous Read Mode that allows for efficient access to the entire memory array with a single Read command.

This feature is ideal for code shadowing applications. A Hold pin, Write Protect pin and programmable write protection, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device ID, one 2,048-Byte Unique ID page, one 2,048-Byte parameter page and ten 2,048-Byte OTP pages. To provide better NAND flash memory manageability, user configurable internal ECC, bad block management are also available in H7A41G24B8CT.

H7A41G24B6CG

1G-BIT 3.3V SPI-NAND FLASH MEMORY

The H7A41G24B6CG (1G-bit) Serial SLC NAND Flash Memory provides a storage solution for systems with limited space, pins and power. The H7A41G24B6CG incorporates the popular SPI interface and the traditional large NAND non-volatile memory space. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 25mA active and 10μA for standby.

H7A41G24B6CG was offered in space-saving packages which were impossible to use in the past for the typical NAND flash memory. The H7A41G24B6CG 1G-bit memory array is organized into 65,536 programmable pages of 2,048-bytes each. The entire page can be programmed at one time using the data from the 2,048-Byte internal buffer. Pages can be erased in groups of 64 (128KB block erase).

The H7A41G24B6CG has 1,024 erasable blocks and supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions.The H7A41G24B6CG supports JEDEC standard manufacturer and device ID, one 2,048-Byte Unique ID page, one 2,048-Byte parameter page and ten 2,048-Byte OTP pages. To provide better NAND flash memory manageability, user configurable internal ECC, bad block management are also available in H7A41G24B6CG.

H7A41G24B6CT

1G-BIT 3.3V SPI-NAND FLASH MEMORY

The H7A41G24B6CT (1G-bit) Serial SLC NAND Flash Memory provides a storage solution for systems with limited space, pins and power. The H7A41G24B6CT incorporates the popular SPI interface and the traditional large NAND non-volatile memory space. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 25mA active and 10μA for standby.

H7A41G24B6CT was offered in space-saving packages which were impossible to use in the past for the typical NAND flash memory. The H7A41G24B6CT 1G-bit memory array is organized into 65,536 programmable pages of 2,048-bytes each. The entire page can be programmed at one time using the data from the 2,048-Byte internal buffer. Pages can be erased in groups of 64 (128KB block erase).

The H7A41G24B6CT has 1,024 erasable blocks and supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions.The H7A41G24B6CT provides a new Continuous Read Mode that allows for efficient access to the entire memory array with a single Read command.

This feature is ideal for code shadowing applications. A Hold pin, Write Protect pin and programmable write protection, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device ID, one 2,048-Byte Unique ID page, one 2,048-Byte parameter page and ten 2,048-Byte OTP pages. To provide better NAND flash memory manageability, user configurable internal ECC, bad block management are also available in H7A41G24B6CT.

H7A41G25B4CG

1G-BIT 3.3V SPI-NAND FLASH MEMORY

The H7A41G25B4CG (1G-bit) Serial SLC NAND Flash Memory provides a storage solution for systems with limited space, pins and power. The H7A41G25B4CG incorporates the popular SPI interface and the traditional large NAND non-volatile memory space. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 25mA active and 10μA for standby.

H7A41G25B4CG was offered in space-saving packages which were impossible to use in the past for the typical NAND flash memory. The H7A41G25B4CG 1G-bit memory array is organized into 65,536 programmable pages of 2,048-bytes each. The entire page can be programmed at one time using the data from the 2,048-Byte internal buffer. Pages can be erased in groups of 64 (128KB block erase).

The H7A41G25B4CG has 1,024 erasable blocks and supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions.The H7A41G25B4CG supports JEDEC standard manufacturer and device ID, one 2,048-Byte Unique ID page, one 2,048-Byte parameter page and ten 2,048-Byte OTP pages. To provide better NAND flash memory manageability, user configurable internal ECC, bad block management are also available in H7A41G25B4CG.

H7A41G24B8CG

1G-BIT 3.3V SPI-NAND FLASH MEMORY

The H7A41G24B8CG (1G-bit) Serial SLC NAND Flash Memory provides a storage solution for systems with limited space, pins and power. The H7A41G24B8CG incorporates the popular SPI interface and the traditional large NAND non-volatile memory space. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 25mA active and 10μA for standby.

H7A41G24B8CG was offered in space-saving packages which were impossible to use in the past for the typical NAND flash memory. The H7A41G24B8CG 1G-bit memory array is organized into 65,536 programmable pages of 2,048-bytes each. The entire page can be programmed at one time using the data from the 2,048-Byte internal buffer. Pages can be erased in groups of 64 (128KB block erase).

The H7A41G24B8CG has 1,024 erasable blocks and supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions.The H7A41G24B8CG supports JEDEC standard manufacturer and device ID, one 2,048-Byte Unique ID page, one 2,048-Byte parameter page and ten 2,048-Byte OTP pages. To provide better NAND flash memory manageability, user configurable internal ECC, bad block management are also available in H7A41G24B8CG.
Our customer-focused attitude has empowered us the potential to win the trust of reputed clients of the market. If you are interest in our Flash IC Manufacturer in Taiwan and Memory IC, please email to us and we’ll be in touch soon.