H2AB08G32E6R

8Gb (32Mx8Banks×32) Low Power DDR4 SDRAM

H2AB08G32E6R uses the double data rate architecture on the Command/Address (CA) bus to reduce the number of input pins in the system. Each command uses one clock cycle,during which command information is transferred on both the positive and negative edge of the clock. To achieve high-speed operation,our H2AB08G32E6R
SDRAM adopt 16n-prefetch interface designed to transfer two data per clock cycle at the I/O pins. A single read or write access for the H2AB08G32E6R effectively consists
of a single 8n-bit wide, one clock cycle data transfer at the internal SDRAM core and eight corresponding n-bit wide,one-half-clock-cycle data transfer at the I/O pins. Read and write accesses to the H2AB08G32E6R are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence.

For H2AB08G32E6R devices, accesses begin with the registration of an Active command, which is then followed by a Read or Write command. The address and BA bits registered coincident with the Active command are used to select the row and the Bank to be accessed. The address bits registered coincident with the Read or Write command are used to select the Bank and the starting column location for the burst access.
Features
  • Frequency to 1600MHz (data rate: 3200Mbps/pin)
  • 16n prefetch DDR architecture
  • 8 internal banks per channel for concurrent operation
  • Single-data-rate CMD/ADR entry
  • Bidirectional/ differential data strobe per byte lane
  • Programmable READ and WRITE latencies (RL/WL)
  • Programmable Burst Lengths: 16,32
  • Partial-array self refresh (PASR)
  • Selectable output drive strength (DS)
  • Clock Stop capability during idle period
  • RoHS-compliant, "green" packaging
  • Programmable VSS (ODT) termination
  • Auto Refresh and Self Refresh Modes
  • FBGA "green" package - 200-ball VFBGA
  • Operating temperature range:
    Single Low: -30°C to 85°C
    Commercial: 0°C to 85°C
  • Directed per-bank refresh for concurrent bank operation and ease of command scheduling
  • VDD1/ VDD2/ VDDQ= 1.8V/ 1.1V/ 1.1V or 0.6V