w-240315-02908.webp

H7A5DM2

128M-BIT 3.3V Serial NOR FLASH MEMORY

H7A5DM2_Serial NOR FLASH MEMORY (2.71 MB)
Features
  • 128M -bit Serial Flash
    – 16,384K-bytes
    – 256 bytes per programmable page
  • Standard, Dual, Quad SPI, DTR
    – Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#, RESET#
    – Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#, RESET#
    – Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
    – SPI DTR (Double Transfer Rate) Read
  • Flexible Architecture
    – Sector of 4K-byte
    – Block of 32/64k-byte
  • Advance Security Features
    – 3*1024-Bytes Security Registers With OTP Lock
  • Support 128 bits Unique ID
  • Software/ Hardware Write Protection
    – Write protect all/ portion of memory via software
    – Enable/ Disable protection with WP# Pin
    – Top or Bottom, Sector or Block selection
  • Continuous Read With 8/ 16/ 32/ 64-byte Wrap
  • Package Options
    – SOP8: 208mil, WSON8: 6x5mm
    – All Pb-free packages are compliant RoHS, Halogen-Free and REACH.
  • Temperature Range & Moisture Sensitivity Level
    – Industrial. (-40℃ to +85℃), MSL3
  • Power Consumption
    – 9mA typical read current under 80MHz
    – 1uA typical Deep Power-Down current
  • Single Power Supply Voltage
    – 2.7 ~ 3.6V
  • Erase/ Program Suspend/ Resume
  • Endurance and Data Retention
    – Minimum 100,000 Program/ Erase Cycle
    – 20-year Data Retention typical
  • High Speed Clock Frequency
    – 104MHz for fast read with 30pF load
    – Dual I/O Data transfer up to 208Mbit/s
    – Quad I/O Data transfer up to 416Mbit/s
    – DTR Quad I/O Data transfer up to 640Mbit/s
  • Program/ Erase Speed
    – Page Program time: 0.4ms typical
    – Sector Erase time: 40ms typical
    – Block Erase time: 0.15/ 0.25s typical
    – Chip Erase time: 30s typical
Loading...