Products

DDR3 SDRAM

Product Name : 8Gb (32Mx8Banks×32) DDR3 SDRAM

Item No. : H2A408G3266A

Description

The H2A408G3266A is a high speed stack multi-chip package integrated 4Gbits x2 DDR3 SDRAM and fabricated with ultra high performance CMOS process containing 8G bits which organized as 32Mbits x 8 banks by 32 bits.
This synchronous device achieves high speed double-data-rate transfer rates of up to 1600 Mb/sec/pin (DDR3-1600) for general applications. The chip is designed to comply with the following key DDR3 SDRAM features:
  1. posted CAS with additive latency,
  2. write latency = read latency -1,
  3. On Die Termination
  4. programmable driver strength data,
  5. seamless BL4 access.

All of the control and address inputs are synchronized with a pair of externally supplied differential clocks. Inputs are latched at the cross point of differential clocks (CK rising and /CK falling).
All I/Os are synchronized with a pair of bidirectional differential data strobes (DQS and /DQS) in a source synchronous fashion. The address bus is used to convey row, column and bank address information in a /RAS and /CAS multiplexing style.
The 8Gb DDR3 devices operates with a single power supply: 1.5V ± 0.075V VDD and VDDQ.
H2A408G3266A _DDR3_256Mx32 (1.7 MB)
Features
  • JEDEC Standard VDD/VDDQ = 1.5V±0.075V.
  • All inputs and outputs are compatible with SSTL_15interface.
  • Fully differential clock inputs (CK, /CK) operation.
  • Eight Banks
  • Posted CAS by programmable additive latency
  • Bust length: 4 with Burst Chop (BC) and 8.
  • CAS Write Latency (CWL): 5,6,7,8
  • CAS Latency(CL): 5,6,7,8,9,10,11
  • Write Latency (WL) =Read Latency (RL) -1.
  • Bi-directional Differential Data Strobe (DQS).
  • Data inputs on DQS centers when write.
  • Data outputs on DQS, /DQS edges when read.
  • On chip DLL align DQ, DQS and /DQS transition with CK transition.
  • DM mask write data-in at the both rising and falling edges of the data strobe.
  • Sequential & Interleaved Burst type available both for 8 & 4 with BC.
  • Multi Purpose Register (MPR) for pre-defined pattern read out
  • On Die Termination (ODT)options: Synchronous ODT, Dynamic ODT, and Asynchronous ODT
  • Auto Refresh and Self Refresh
  • 8,192 Refresh Cycles / 64ms
  • Refresh Interval:7.8us Tcase between 0°C ~ 85°C
  • RoHS Compliance
  • Driver Strength:RZQ/7, RZQ/6(RZQ=240Ω)
  • High Temperature Self-Refresh rate enable
  • ZQ calibration for DQ drive and ODT
  • RESET pin for initialization and reset function

Loading...