Axeme - Hwaling Technology Co., Ltd.

Hwaling Technology is based in Taipei, Taiwan. As the interaction of Communication, Electronic Consumer and Computing gadgets has became the main stream in consumer lives. Hwaling practices his specialty with long-term experience in this memory field to drive quality products and services to customers.

DDR4 SDRAM Manufacturer

DDR3 SDRAM is being widely used today by businesses as a way to make DDR3 SDRAM can do a variety of other functions depending on what specific needs the business requires. To ensure that the requirements of this policy are met, Axeme - Hwaling Technology Co., Ltd. will keep providing and maintaining safe and healthy working conditions, equipment and systems of work, together with adequate information, instruction, training and supervision for all employees.

H2AB08G32D6C

8Gb (32Mx8Banks×32) Low Power DDR4 SDRAM

H2AB08G32D6C uses the double data rate architecture on the Command/Address (CA) bus to reduce the number of input pins in the system. Each command uses one clock cycle,during which command information is transferred on both the positive and negative edge of the clock. To achieve high-speed operation, our H2AB08G32D6C SDRAM adopt 16n-prefetch interface designed to transfer two data per clock cycle at the I/O pins. A single read or write access for the H2AB08G32D6C effectively consists of a single 8n-bit wide, one clock cycle data transfer at the internal SDRAM core and eight corresponding n-bit wide,one-half-clock-cycle data transfer at the I/O pins. Read and write accesses to the H2AB08G32D6C are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence.

For H2AB08G32D6C devices, accesses begin with the registration of an Active command, which is then followed by a Read or Write command. The address and BA bits registered coincident with the Active command are used to select the row and the Bank to be accessed. The address bits registered coincident with the Read or Write command are used to select the Bank and the starting column location for the burst access.
Features :

  • Bidirectional, data strobe (DQS,/DQS) is transmitted/received with data, to be used in capturing data at the receiver
  • Differential clock inputs (CK and /CK)
  • Differential data strobe (DQS and /DQS)
  • Commands & addresses entered on both positive & negative CK edge; data and data mask referenced to both edges of DQS
  • Eight internal banks for concurrent operation
  • Data mask (DM) for write data
  • Programmable Burst Lengths: 16,32
  • Burst type: Sequential or interleave
  • Programmable RL (Read latency) & WL (Write latency)
  • Clock Stop capability during idle period
  • Auto Pre-charge for each burst access
  • Configurable Drive Strength (DS)
  • Auto Refresh and Self Refresh Modes
  • Optional Partial Array Self Refresh (PASR) and Temperature Compensated Self Refresh (TCSR)
  • Deep Power Down Mode (DPD)
  • VDD2/VDDCA/VDDQ= 1.06~1.17V; VDD1=1.70~1.95V

Send Message
Contact Information

* If you use some mailboxes, such as free mailboxes from yahoo.com, the letters you send may be blocked by the receiving host and cannot be delivered.

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.

As a result of its commitment to R&D, manufacturing and quality control, Axeme - Hwaling Technology Co., Ltd. engineers reliable and long-lasting solutions as a partner for continuous improvement. With extensive expertise in engineering and product design, Axeme - Hwaling Technology Co., Ltd. able to offer value-added products to our customers. We review our offerings regularly to make sure our prices are competitive, if not the lowest available. For more details about our DDR3 SDRAM, please contact with us immediately.